A lot of homeowners are converting their energy sources from their existing utility companies to an alternative source of energy which is that of solar power. Power bills are getting expensive and one way to save on cost is to divert electrical sources to a more cost effective alternative.At present, learning how to build a solar panel at home is made possible and it can provide you sufficient electrical power for you to live on.
It is very simple and the materials needed are just within your reach. The process involved is very basic and almost anybody can understand and follow the simple instructions.
The following items are required:
1. Small ammeter
2. Salt and water
3. Copper flashing
4. 2 alligator clips
5. Metal shears
6. Wide mouth glass jar
After you gathered the listed items, were ready to get stuck into building your own solar panels.
1. Cut the copper flashing to a square shape that will fit to your stove. Do not forget to clean the flashing well and use sandpaper to ensure cleanliness.
2. Then put the clean copper flashing on top of the stove and let it heat up. The copper will change its color when heated.
3. Heat the flashing about 30 minutes and turn the stove off and let the flashing cool down on top of it as the temperature cools down. As it cools down, you will notice that the black culpric oxide will soon flake off. Ensure that all black oxides will be removed and the red layer of culprit oxide will remain. You may use water to clean the flashing. The remaining red oxide is important because it will conduct electricity ones it will be hit by sunlight.
4. Cut another copper flashing of the same size. You may use your hands to bend both the copper and place it inside the wide mouth jar. Place the copper on different sides of the jar so that it will not touch the other.
5. Insert the positive terminal of the ammeter to the newly cut flashing and the negative terminal of the ammeter to the cooked flashing with culpric oxide.
6. Mix at least two tablespoon of salt to a hot water. Place the mixture inside the jar and let he clips get high and dry. Place your project under the sun and observe the ammeter for current.
Start now! Learn how to build your very own home solar panel today!
Learn how to build a solar panel:
http://ezinearticles.com/?Learn-How-to-Build-a-Solar-Panel-to-Save-Electricity-in-Your-Home&id=2727558
Useful information home solar panel:
http://www.scienceanalysis.com/home-solar-panel.html
